BLUETTI EB3A: Runtime & Specs
The BLUETTI EB3A is a 269 Wh LiFePO4 power station with 600 W of continuous AC output and a 1,200 W surge rating. It runs a typical full-size fridge for about 3.9 hours. It has been replaced or discontinued, but many are still in use.
We may earn a commission if you buy through these links. It never changes our numbers, and every model in our database is included whether or not it pays us. Learn more.
How long will the EB3A run your appliances?
Nonstop runtime for one device at a time, using typical US wattages and 85% inverter efficiency. Devices marked ✕ can't run on this model.
| Device | Avg draw | Runtime | Bar |
|---|---|---|---|
| LED light bulb | 9 W | 25 hours | |
| Phone charging | 10 W | 24 hours | |
| Wi-Fi router + modem | 15 W | 15 hours | |
| Laptop | 50 W | 4.6 hours | |
| CPAP + humidifier | 30 W | 7.6 hours | |
| CPAP with heated humidifier + humidifier | 60 W | 3.8 hours | |
| Starlink Standard | 90 W | 2.5 hours | |
| TV | 100 W | 2.3 hours | |
| Mini fridge | 29 W | 7.9 hours | |
| Refrigerator | 58 W | 3.9 hours | |
| Chest freezer | 29 W | 7.9 hours | |
| Sump pump (1/3 HP) | 160 W | Too much power | |
| Sump pump (1/2 HP) | 210 W | Too much power | |
| Window AC | 225 W | 1 hours | |
| Drip coffee maker | 1,000 W | Too much power | |
| Microwave | 1,500 W | Too much power | |
| Space heater | 750 W | Too much power | |
| Well pump | 33 W | Needs 240 V |
Fridges, freezers, pumps and AC units cycle on and off, so we use their average draw. Want a mix of devices on a schedule? Use the runtime calculator.
What the EB3A can't power
- Refrigerator (older full-size, 1990s–early 2000s): needs about 1,600 W to start
- Microwave (1,000 W cooking power): needs 1,500 W running
- Drip coffee maker (10–12 cup): needs 1,000 W running
- Electric kettle (1.7 L): needs 1,500 W running
- Toaster (2–4 slice): needs 1,000 W running
- Induction burner (single, portable): needs 1,500 W running
- Electric pressure cooker (6 qt, Instant Pot type): needs 1,000 W running
- Window AC (8,000 BTU): needs 700 W running
- Space heater (portable, 1,500 W): needs 1,500 W running
- Gas furnace blower fan: needs about 1,400 W to start
- Sump pump (1/3 HP): needs 800 W running
- Sump pump (1/2 HP): needs 1,050 W running
- Well pump (1/2 HP submersible): needs 240 V
- Garage door opener: needs 720 W running
- Circular saw (7-1/4 in.): needs 1,400 W running
- EV Level 1 charging (120 V, 12 A): needs 1,440 W running
Solar charging time
Hours of good sun to charge from empty, assuming panels deliver 75% of their rating.
| Panels | Power in | Hours of sun |
|---|---|---|
| 100 W of panels | 75 W | 3.6 hours |
| 200 W of panels | 150 W | 1.8 hours |
Check panel voltage and wiring with the solar charging calculator.
Full specifications
| Battery capacity | 269 Wh |
|---|---|
| Battery chemistry | LiFePO4 (LFP) |
| Continuous AC output | 600 W |
| Surge (peak) output | 1,200 W |
| Power Lifting (heating devices) | None listed |
| AC voltage | 120V |
| AC outlets | 2 |
| USB-C ports | 1 (up to 100 W) |
| USB-A ports | 2 |
| 12 V car outlet | Yes |
| Max solar input | 200 W |
| Solar voltage range | 12–28 V |
| Solar max current | 8.5 A |
| Max AC charging power | 350 W |
| AC charging time (maker claim) | ≈1.3–1.8 h (350W Turbo) |
| Expandable | No |
| UPS / EPS switchover | Not listed |
| Cycle life | 2,500 cycles |
| Weight | 10.1 lb |
| Warranty | 2 years |
Notes: Discontinued. Manual describes Power Lifting mode but no wattage is published. Page also claims 80% in 30 min (AC+solar 430W) and '40 min' (meta). No UPS switchover time given.
Specs from BLUETTI's published documents, as of September 2026. Found an error? Tell us.