Goal Zero Yeti PRO 4000: Runtime & Specs
The Goal Zero Yeti PRO 4000 is a 3,994 Wh LiFePO4 power station with 3,600 W of continuous AC output and a 7,200 W surge rating. It runs a typical full-size fridge for about 2.4 days.
We may earn a commission if you buy through these links. It never changes our numbers, and every model in our database is included whether or not it pays us. Learn more.
How long will the Yeti PRO 4000 run your appliances?
Nonstop runtime for one device at a time, using typical US wattages and 85% inverter efficiency. Devices marked ✕ can't run on this model.
| Device | Avg draw | Runtime | Bar |
|---|---|---|---|
| LED light bulb | 9 W | 15.7 days | |
| Phone charging | 10 W | 15 days | |
| Wi-Fi router + modem | 15 W | 9.4 days | |
| Laptop | 50 W | 2.8 days | |
| CPAP + humidifier | 30 W | 4.7 days | |
| CPAP with heated humidifier + humidifier | 60 W | 2.4 days | |
| Starlink Standard | 90 W | 38 hours | |
| TV | 100 W | 34 hours | |
| Mini fridge | 29 W | 4.9 days | |
| Refrigerator | 58 W | 2.4 days | |
| Chest freezer | 29 W | 4.9 days | |
| Sump pump (1/3 HP) | 160 W | 21 hours | |
| Sump pump (1/2 HP) | 210 W | 16 hours | |
| Window AC | 225 W | 15 hours | |
| Drip coffee maker | 1,000 W | 3.4 hours | |
| Microwave | 1,500 W | 2.3 hours | |
| Space heater | 750 W | 4.5 hours | |
| Well pump | 33 W | Needs 240 V |
Fridges, freezers, pumps and AC units cycle on and off, so we use their average draw. Want a mix of devices on a schedule? Use the runtime calculator.
What the Yeti PRO 4000 can't power
- Well pump (1/2 HP submersible): needs 240 V
Solar charging time
Hours of good sun to charge from empty, assuming panels deliver 75% of their rating.
| Panels | Power in | Hours of sun |
|---|---|---|
| 100 W of panels | 75 W | 53 hours |
| 200 W of panels | 150 W | 27 hours |
| 400 W of panels | 300 W | 13 hours |
| 3,000 W of panels | 2,250 W | 1.8 hours |
Check panel voltage and wiring with the solar charging calculator.
Full specifications
| Battery capacity | 3,994 Wh |
|---|---|
| Battery chemistry | LiFePO4 (LFP) |
| Continuous AC output | 3,600 W |
| Surge (peak) output | 7,200 W |
| Boost mode | None listed |
| AC voltage | 120V |
| AC outlets | 5 |
| USB-C ports | 3 (up to 100 W) |
| USB-A ports | 3 |
| 12 V car outlet | Yes |
| Max solar input | 3,000 W |
| Solar voltage range | 13.3–150 V |
| Solar max current | 30 A |
| Max AC charging power | 1,800 W |
| AC charging time (maker claim) | 0–80% in 2 hr; 0–100% in under 3 hr |
| Expandable | Yes, up to 19,968 Wh |
| UPS / EPS switchover | 15 ms |
| Cycle life | 4,000 cycles (to 80%) |
| Weight | 115.7 lb |
| Warranty | 5 years |
Notes: 4×20A + 1×TT-30R. APS <15 ms (guide). HPP 30A on product page, 40A in guide; +8mm 275W. Max = 5×3993.6 Wh (+4 Tank PRO 4000; GZ says 'up to 20 kWh'). Cycles to 80%.
Specs from Goal Zero's published documents, as of September 2026. Found an error? Tell us.
Sources
Similar power stations
- Yeti PRO 4000 vs EcoFlow DELTA Pro 3
- Yeti PRO 4000 vs Anker SOLIX F3800
- Yeti PRO 4000 vs Anker SOLIX F3800 Plus
- Yeti PRO 4000 vs Anker SOLIX F3000
- Yeti PRO 4000 vs BLUETTI Elite 300
- Yeti PRO 4000 vs Jackery Explorer 5000 Plus